Datasheet4U Logo Datasheet4U.com

MAX14483 - SPI Digital Isolator

Description

The MAX14483 is a 6-channel, 3.75kVRMS digital galvanic isolator using Maxim’s proprietary process technology.

The six signal channels are individually optimized for SPI applications and include very low propagation delay on the SDI, SDO, and SCLK channels.

Features

  • Saves Space and Components.
  • 6 Isolated Channels in a 20-SSOP Package.
  • Low Propagation Delay on SCLK, SDI, and SDO.
  • Up to 100MHz Clock, 200Mbps Data Rate.
  • 10ns Typical Propagation Delay.
  • 2ns Maximum Pulse Width Distortion.
  • 250ps Typical Peak Jitter.
  • Robust Galvanic Isolation of Digital Signals.
  • Withstands 3.75kVRMS for 60s (VISO).
  • Continuously Withstands 450VRMS (VIOWM).
  • Withstands ±10kV Surge b.

📥 Download Datasheet

Datasheet preview – MAX14483

Datasheet Details

Part number MAX14483
Manufacturer Maxim Integrated
File Size 851.14 KB
Description SPI Digital Isolator
Datasheet download datasheet MAX14483 Datasheet
Additional preview pages of the MAX14483 datasheet.

📁 Similar Datasheet

  • MAX1448 - Low-Power ADC (Maxim Integrated Products)
  • MAX144 - +2.7V / Low-Power / 2-Channel / 108ksps / Serial 12-Bit ADCs (Maxim)
  • MAX1441 - Two-Channel Proximity and Touch Sensor (Maxim Integrated Products)
  • MAX1444 - 10-Bit / 40Msps / 3.0V / Low-Power ADC (Maxim)
  • MAX1446 - 10-Bit / 60Msps / 3.0V / Low-Power ADC (Maxim)
  • MAX1447 - Single-Chip ADCs (Maxim Integrated Products)
  • MAX1449 - 10-Bit / 105Msps / Single +3.3V / Low-Power ADC (Maxim)
  • MAX140 - 3 1/2 Digit A/D Converters (Maxim)
  • MAX1400 - Oversampling (Sigma-Delta) ADC (Maxim)
  • MAX1401 - #V / 18-Bit / Low-Power / Multichannel / Oversampling Sigma-Delta ADC (Maxim)
Other Datasheets by Maxim Integrated

Full PDF Text Transcription

Click to expand full text
MAX14483 6-Channel, Low-Power, 3.75kVRMS, SPI Digital Isolator General Description The MAX14483 is a 6-channel, 3.75kVRMS digital galvanic isolator using Maxim’s proprietary process technology. The six signal channels are individually optimized for SPI applications and include very low propagation delay on the SDI, SDO, and SCLK channels. The SDO channel’s tri-state control is enabled by the CS input as well as a second enable control input pin (SDOEN), allowing a single MAX14483 to isolate multiple SPI devices. To simplify system design, an open-drain FAULT output can be wire ORed with error outputs from other devices.
Published: |